русский
Español
FrançaisIndustry News
As conductive coatings, conductive inks, and new energy materials continue to expand, carbon nanomaterials — graphene, carbon nanotubes, and conductive carbon black — have become essential functional fillers across these systems. But these materials share a defining characteristic: extremely high surface area combined with a strong inherent tendency to aggregate. When dispersion is inadequate, the consequences extend well beyond conductivity — reaching into processing stability, storage performance, and production efficiency.
Four Consequences of Inadequate Graphene Dispersion
Powder Re-Agglomeration
Nanomaterial particles readily form secondary aggregates with each other, undermining the uniformity of dispersion that the formulation depends on for consistent performance.
Elevated Slurry Viscosity
High solid-content systems built on poorly dispersed carbon nanomaterials often become difficult to process, with inadequate flow properties that complicate coating, printing, or casting operations.
Poor Storage Stability
Systems prone to settling or recoarsening after standing lose their usability over time, creating quality variability between production and point of use.
Conductivity Fluctuation
Uneven dispersion leads to an unstable conductive network within the finished material, directly undermining the consistency of the end performance the material was selected for.
Why Mechanical Dispersion Alone Has Practical Limits
A common approach to improving the dispersion of carbon nanomaterials is to increase grinding intensity or extend dispersion time. This can resolve part of the aggregation problem, but for materials with very high specific surface area, mechanical energy alone struggles to maintain stable dispersion over the long term.
Relying solely on mechanical force to disperse high-surface-area carbon materials is difficult to sustain — and it tends to increase both energy consumption and processing cost without delivering proportionally better stability. A dedicated dispersion system, formulated specifically for the surface chemistry of these materials, provides a more durable solution than mechanical input alone.
DH-6552W — Waterborne Dispersant for Carbon Nanomaterials
DH-6552W is a waterborne dispersant developed specifically for carbon nanomaterials, providing effective wetting and dispersion capability for graphene, carbon nanotubes, conductive carbon black, and high-structure carbon black. By improving the interfacial state of these nanomaterials within the formulation, it reduces aggregation tendency and improves dispersion efficiency.
| Performance Area | Effect | Relevance |
| Wetting & Dispersion | Improves wetting of graphene, CNT, conductive carbon black, and high-structure carbon black surfaces | Reduces initial aggregation during mixing and grinding |
| Rheological Structure | Helps the system form a more stable rheological structure, balancing flow with thixotropy | Supports both processability and shape retention in the wet state |
| High-Solids Loading Capacity | Improves the system's carrying capacity in high-solid-content concentrated slurries | Relevant for concentrated masterbatch and paste production |
| Storage Stability | Improves resistance to settling and recoarsening after standing | Supports consistent quality between production and point of use |
| Resin Compatibility | Maintains good compatibility across multiple resin systems | Provides flexible formulation space across different conductive material applications |
Application Areas
Conductive Coatings Conductive Inks New Energy Materials EMI Shielding Coatings Concentrated Carbon Masterbatch Functional Carbon Black Systems
Formulation Guidance
| Parameter | Recommendation | Notes |
| Addition Stage | Pre-mix with carbon nanomaterial before dispersion/grinding | Early introduction maximises surface coverage as aggregates are broken down |
| Dosage Range | Optimise according to specific surface area of the carbon material used | Graphene and CNT typically require higher relative loading than conventional carbon black due to greater surface area |
| System Type | Waterborne systems | For solvent-borne carbon nanomaterial systems, consult our technical team for an appropriate alternative |
| Mixing Energy | Moderate to high shear during initial dispersion stage recommended | Combine with adequate mechanical dispersion for best results; the dispersant complements rather than replaces appropriate mixing |
Frequently Asked Questions
Why is graphene more difficult to disperse than conventional pigments?
Graphene has an extremely high specific surface area and a 2D sheet-like structure that promotes strong van der Waals attraction between sheets, leading to stacking and re-aggregation. This is fundamentally different from the roughly spherical particle geometry of most conventional pigments, and requires a dispersant specifically suited to stabilising this type of surface and geometry.
Does poor dispersion always show up as a visible quality problem immediately?
Not necessarily. A system can appear adequately dispersed and process normally in the short term, while still being prone to gradual re-aggregation during storage. This is why evaluating storage stability over a realistic timeframe, rather than relying solely on initial dispersion quality, is an important part of formulation development for carbon nanomaterial systems.
Can the same dispersant be used for both graphene and carbon nanotubes?
DH-6552W is designed to address multiple carbon nanomaterial types, including graphene, carbon nanotubes, conductive carbon black, and high-structure carbon black, given their broadly similar high-surface-area, aggregation-prone surface chemistry. Optimal dosage may vary between material types and should be confirmed through formulation trials for your specific carbon source and target application.
Key Takeaway
The performance of conductive coatings, conductive inks, and new energy material systems depends fundamentally on the dispersion quality of the carbon nanomaterials within them. Poor dispersion does not just reduce conductivity — it compounds into processing difficulty, storage instability, and inconsistent end performance. Addressing this through a dispersant formulated specifically for the surface chemistry of graphene, carbon nanotubes, and conductive carbon black provides a more reliable and scalable solution than relying on mechanical dispersion energy alone.
Request Technical Data & Samples for DH-6552W
Our technical team provides TDS, application guidance, and dosage recommendations for your specific carbon nanomaterial system.
